Welcome to the official website of Zigong Chuanmi Co., LTD!

这是描述信息
/
/
/
25TLD-25 40TLD-17 40TLD-19 50DTD-30 50TLD-D40 65TLD-30 80TLD-36 100TLD-35 150TLD-50 200TLD-45 mechanical seal
搜索
Search

PRODUCT

All categories

25TLD-25 40TLD-17 40TLD-19 50DTD-30 50TLD-D40 65TLD-30 80TLD-36 100TLD-35 150TLD-50 200TLD-45 mechanical seal

Pin     brand: Chuan Mi seal Scope of application: chemical pumps, impurity pumps, desulfurization pumps, circulating pumps Applicable industries: steelmaking, papermaking, chemical industry, electric power, cement industry, etc. Applicable stations: slurry pump, gypsum pump, limestone pump Applicable host: Shandong Zibo Pump Industry
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
CMDT-00049
Quantity
-
+
Stock:
0
set
Keyword:
Desulfurization pump mechanical seal
Gypsum discharge pump mechanical seal
Slurry pump mechanical seal
1
product description
Parameters

40TLD-19 50DTD-30 50TLD-D40 65TLD-30 80TLD-36 100TLD-35 150TLD-50 200TLD-45 mechanical seal

      

Structural features:

Double end face manifold type mechanical seal. Easy to install and simple to use. Balance, arbitrary rotation.

The internal working length is short. The static ring compensation multiple springs are externally not in contact with the medium.

Applicable medium:

Medium containing high impurity content such as gypsum and lime slurry.

Working parameters:

Fixed content: ≤30%

Temperature: ≤280℃

Pressure: ≤2.5MPa

Shaft diameter: ≤200mm

Material parameters:

Body material: 316L or 2205, 2507, 1.4529

Seal ring material: SSiC or SiC

Rubber material: fluorine rubber or perfluoroether rubber

main application:

This type of mechanical seal is mainly used for flue gas desulfurization of coal-fired power generation, and is suitable for absorption tower slurry circulation pump, gypsum slurry pump, limestone slurry pump, and gypsum discharge pump.

Common pump numbers are as follows:

25TLD-15 25TLD-25 40TLD-17 40TLD-19

40TLD-25 40TLD-28 40TLD-30 50TLD-30

50TLD-33 50TLD-D40 50TLD-45 50TLD-50

65TLD-30 65TLD-40 80TLD-33 80TLD-36

80TLD-39 80TLD-42 80TLD-52 100TLD-35

100TLD-40 100TLD-42 100TLD-50 100TLD-60

150TLD-C42 150TLD-48 150TLD-50 150TLD-55

150TLD-58 150TLD-60 150TLD-65 150TLD-70

200TLD-C42 200TLD-B43 200TLD-B45 200TLD-50

200TLD-58 200TLD-60 200TLD-63 200TLD-65

200TLD-75 250TLD-43 250TLD-44 250TLD-47

250TLD-50 250TLD-65 250TLD-75 300TLD-40

300TLD-50 300TLD-56 300TLD-60 300TLD-65

350TLD-52 400TLD-50 300TLD-50 300TLD-56

400TL-54 400TL-70 400TL-65 400TL-67

500TL-70 500TL-71 500TL-69 500TL-63

500TL-76 550TL-71 550TL-75 600TL-80

600TL-82 600TL-83 650TL-82 650TL-83

650TL-80 650TL-85 700TL-84 700TL-90

700TL-90 700TL-100 800TL-90 800TL-100

700TL-6300 800TL-90 800TL-100

Mechanical seal model:

YTBB174-25 YTBB174-35 YTBB174-38 YTBB174-40

YTBB174-45 YTBB174-65 YTBB174-75 YTBB174-80

YTBB174-95 YTBB174-115 YTBB174-125

Installation and use requirements:

1. The radial runout of the shaft of the equipment should not be greater than 0.04 mm, and the axial runout is not allowed to be greater than 0.1 mm;

2. The sealing cavity of the equipment should be kept clean during installation, the sealing parts should be cleaned, and the sealing end face should be intact to prevent impurities and dust from being brought into the sealing part;

3. It is strictly forbidden to knock or knock during the installation process, so as not to damage the mechanical seal due to friction and seal failure;

4. During installation, the surface in contact with the seal should be coated with a layer of clean mechanical oil for smooth installation;

5. When installing the static ring gland, the tightening screws must be evenly stressed to ensure that the end face of the static ring is perpendicular to the axis line;

6. Push the moving ring by hand after installation, which can make the moving ring move flexibly on the shaft and have certain flexibility;

7. Rotate the shaft by hand after installation, and the shaft should not feel light or heavy;

8. The equipment must be filled with medium before operation to prevent dry friction and seal failure;

Operating parameters:
specification:
25mm~200mm
pressure:
0-2.5MPa
temperature:
-20~280
Line speed:
≤15m/min
Suitable medium:
Medium containing high impurity content such as gypsum and lime slurry.
product features:
Sealing surface:
Graphite, cemented carbide, silicon carbide
Auxiliary seal:
Nitrile, ethylene propylene, fluorine rubber, silica gel, etc.
Metal components:
304、316L、2205、2507、1.4529
Structural features:
Cartridge mechanical seal, easy to install, simple to use; balance, arbitrary rotation.
这是描述信息
Contact us

Service hotline:0813-3202978

Working days: Monday to Saturday

Time:8:30-18:00

Consulting:
13890019297

No. 339-5, Kechuang 4th Road, High tech Industrial Park, Yantan District, Zigong City, Sichuan Province, China

Zigong Chuanmi Mechanical seal Co., LTD    蜀ICP备12011709号-1