Welcome to the official website of Zigong Chuanmi Co., LTD!

这是描述信息
/
/
/
LCF150/300 LCF200/300 LCF200/410 LCF250/430 LCF300/635 mechanical seal
搜索
Search

PRODUCT

All categories

LCF150/300 LCF200/300 LCF200/410 LCF250/430 LCF300/635 mechanical seal

Pin     brand: Chuan Mi seal Scope of application: chemical pumps, impurity pumps, desulfurization pumps Applicable industries: steelmaking, papermaking, chemical, electric power, cement industries, etc. Applicable stations: slurry pump, gypsum pump, limestone pump Applicable host: Xiangyang 525 Pump Industry, Jingzhou Jianghai Pump Industry, Xiangyang Xinjinkai Pump Industry
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
CMDT-0008
Quantity
-
+
Stock:
0
set
Keyword:
Desulfurization pump mechanical seal gypsum discharge
1
product description
Parameters

HTM/HRM/HR325/HMR3C/LB type mechanical seal for Xiangyang 525 LC/LCF wear-resistant and corrosion-resistant pump

Mechanical seals are divided into single end manifold and double end manifold

Single-end face manifold type: There is only one pair of sealing joint faces, which are pre-assembled by the sealing manufacturer when leaving the factory, without customer adjustment, just assemble directly. Easy to install and simple to use. The cooling water pressure is controlled between 0.05-0.1MPa

Picture of exterior single end face seal

The single end face is divided into internal type (the entire seal including the large flange is immersed in the slurry, and the assembly method is from the impeller end to the motor end) and the external type (a small part of the entire seal is immersed in the slurry, and the assembly method is from the motor end. Assemble to the impeller end)

Picture of built-in single end face seal

Double-end-face container type: There are 2 pairs of sealing joint surfaces, which are pre-assembled by the sealing manufacturer when leaving the factory. No customer adjustment is required, just assembling directly. Easy to install and simple to use. The cooling water pressure is controlled between 0.05-0.1MPa

Picture of exterior double end seal

The double end face generally refers to the exterior double end face, which is a derivative of the single end face exterior type (the single end face seal water side skeleton oil seal is changed to a set of tandem mechanical seals) to increase the service life

Structural features:

Single end face (double end face) cartridge mechanical seal. Easy to install and simple to use. Balance, arbitrary rotation.

The internal working length is short. The static ring compensation multiple springs are externally not in contact with the medium.

Applicable medium:

Medium containing high impurity content such as gypsum and lime slurry.

Working parameters:

Fixed content: ≤30%

Temperature: ≤280℃

Pressure: ≤2.5MPa

Shaft diameter: ≤200mm

Material parameters:

Body material: 316L or 2205, 2507, 1.4529

Seal ring material: SSiC or SiC

Rubber material: fluorine rubber or perfluoroether rubber

main application:

This type of mechanical seal is mainly used for flue gas desulfurization of coal-fired power generation, and is suitable for absorption tower slurry circulation pump, gypsum slurry pump, limestone slurry pump, and gypsum discharge pump.

Common pump numbers are as follows:

LCF40/250I LCF40/350I LCF40/400I LCF40/450I LCF50/350N2 LCF50/400I LCF50/460I LCF65/310I LCF65/315I LCF65/350I LCF65/400I LCF80/400I LCF80/450I LCF100/300 LCF100/320I LCF100/350I LCF100/320I LCF100/350I 420I LCF125/405I LCF150/300I LCF150/350I LCF200/300I LCF100/500T LCF150/400I LCF200/410I LCF250/430I LCF250/430I LC300/500I LC300/530I LC300/400I LC300/635I

LC300/630I LC350/500I LC350/560I LC400/500I LC400/540I LC450/635I LC500/630I LC550/700I LC550/710I LC550/750I LC600/825I LC700/900I LC700/898I LC800/1000I LC900/1150I

LC500/630II LC550/700II LC550/710II LC550/750II LC600/825II LC700/900II LC700/898II LC800/1000II LC900/1150II

Seal model:

HTM-30S251Z HTM-30S351X HTM-30S220Z HTM-30S220Q

HTM-30D251ZZ HTM-30D351X

HTM-40S251Z HTM-40S351X HTM-40S220Z HTM-40S220Q

HTM-40D251ZZ HTM-40D351XX

HTM-55S251Z HTM-55S351X HTM-55S220Z HTM-55S220Q

HTM-55D251ZZ HTM-55D351XX

HTM-60S251Z HTM-60S351X HTM-60S220Z HTM-60S220Q

HTM-60D251ZZ HTM-60D351XX

HTM-80S251Z HTM-80S351X HTM-80S220Z HTM-80S220Q

HTM-80D251ZZ HTM-80D351XX

LB-LK7-120S LB-LK7-120D LB-LK6-115S LB-LK6-115D

HTM-30S HTM-40S HTM-55S HTM-60S HTM-80S

HTM-30D HTM-40D HTM-55D HTM-60D HTM-80D

HR3-125 HR3-142 HR3-158 HR3-175 HR3-198

HR325/230 HR325/210 HR325/190 HR325/170

HRM-125D3 HRM-142D3 HRM-158D3 HRM-175D3 HRM-198D3

HRM-125S3 HRM-142S3 HRM-158S3 HRM-175S3 HRM-198S3

HMR3C-125 HMR3C-142 HMR3C-158 HMR3C-175 HMR3C-198

Installation and use requirements:

1. The radial runout of the shaft of the equipment should not be greater than 0.04 mm, and the axial runout is not allowed to be greater than 0.1 mm;

2. The sealing cavity of the equipment should be kept clean during installation, the sealing parts should be cleaned, and the sealing end face should be intact to prevent impurities and dust from being brought into the sealing part;

3. It is strictly forbidden to knock or knock during the installation process, so as not to damage the mechanical seal due to friction and seal failure;

4. During installation, the surface in contact with the seal should be coated with a layer of clean mechanical oil for smooth installation;

5. When installing the static ring gland, the tightening screws must be evenly stressed to ensure that the end face of the static ring is perpendicular to the axis line;

6. Push the moving ring by hand after installation, which can make the moving ring move flexibly on the shaft and have certain flexibility;

7. Rotate the shaft by hand after installation, and the shaft should not feel light or heavy;

8. The equipment must be filled with medium before operation to prevent dry friction and seal failure;

Operating parameters:
specification:
30mm~198mm
pressure:
0-2.5MPa
temperature:
-20~280
Line speed:
≤15m/min
Suitable medium:
Medium containing high impurity content such as gypsum and lime slurry.
product features:
Sealing surface:
Graphite, cemented carbide, silicon carbide
Auxiliary seal:
Nitrile, ethylene propylene, fluorine rubber, silicone, etc.
Metal components:
304、316L、2205、2507、1.4529
Structural features:
Cartridge mechanical seal, easy to install, simple to use; balance, arbitrary rotation.
这是描述信息
Contact us

Service hotline:0813-3202978

Working days: Monday to Saturday

Time:8:30-18:00

Consulting:
13890019297

No. 339-5, Kechuang 4th Road, High tech Industrial Park, Yantan District, Zigong City, Sichuan Province, China

Zigong Chuanmi Mechanical seal Co., LTD    蜀ICP备12011709号-1