PRODUCT
LCP3S LCP3D LCP4S LCP4D LCP5S LCP5D LCP7S LCP7D LCP8S LCP8D mechanical seal
LCP type slurry pump with LCP3 LCP4 LCP5 LCP7 LCP8 mechanical seal
Mechanical seals are divided into single end manifold and double end manifold
Single-end face manifold type: There is only one pair of sealing joint faces, which are pre-assembled by the sealing manufacturer before leaving the factory. No customer adjustment is required, just assembling directly. Easy to install and simple to use. The cooling water pressure is controlled between 0.05-0.1MPa
Single end face seal picture
Double-end-face container type: There are 2 pairs of sealing joint surfaces, which are pre-assembled by the sealing manufacturer when leaving the factory. No customer adjustment is required, just assembling directly. Easy to install and simple to use. The cooling water pressure is controlled between 0.05-0.1MPa
Double end face seal picture
The double end face generally refers to the exterior double end face, which is a derivative of the single end face exterior type (the single end face seal water side skeleton oil seal is changed to a set of tandem mechanical seals) to increase the service life
Structural features:
Single end face (double end face) cartridge mechanical seal. Easy to install and simple to use. Balance, arbitrary rotation.
The internal working length is short. The static ring compensation multiple springs are externally not in contact with the medium.
Applicable medium:
Medium containing high impurity content such as gypsum and lime slurry.
Working parameters:
Fixed content: ≤30%
Temperature: ≤280℃
Pressure: ≤2.5MPa
Shaft diameter: ≤150mm
Material parameters:
Body material: 316L or 2205, 2507, 1.4529
Seal ring material: SSiC or SiC
Rubber material: fluorine rubber or perfluoroether rubber
main application:
This type of mechanical seal is mainly used for flue gas desulfurization of coal-fired power generation, and is suitable for absorption tower slurry circulation pump, gypsum slurry pump, limestone slurry pump, and gypsum discharge pump.
Common pump numbers are as follows:
LCP50-250 LCP50-315 LCP65-250 LCP80-200
LCP80-250 LCP100-200 LCP100-250 LCP125-250
LCP65-315 LCP80-315 LCP80-400 LCP100-315
LCP100-400 LCP125-315 LCP125-400 LCP150-250
LCP200-250 LCP150-315 LCP150-400 LCP150-500
LCP200-315 LCP200-400 LCP250-315 LCP200-500
Seal model:
LCP2S2 LCP2D2 LCP3S2 LCP3D2
LCP4S2 LCP4D2 LCP5S2 LCP5D2
LCP6S2 LCP6D2 LCP7S2 LCP7D2
LCP8S2 LCP8D2 LCP9S2 LCP9D2
LCP9S2 LCP9D2 LCP10S2 LCP10D2
Installation and use requirements:
1. The radial runout of the shaft of the equipment should not be greater than 0.04 mm, and the axial runout is not allowed to be greater than 0.1 mm;
2. The sealing cavity of the equipment should be kept clean during installation, the sealing parts should be cleaned, and the sealing end face should be intact to prevent impurities and dust from being brought into the sealing part;
3. It is strictly forbidden to knock or knock during the installation process, so as not to damage the mechanical seal due to friction and seal failure;
4. During installation, a layer of clean mechanical oil should be applied to the surface in contact with the seal for smooth installation;
5. When installing the static ring gland, the tightening screws must be evenly stressed to ensure that the end face of the static ring is perpendicular to the axis line;
6. After installation, push the moving ring by hand, which can make the moving ring move flexibly on the shaft and have certain flexibility;
7. Rotate the shaft by hand after installation, and the shaft should not feel light or heavy;
8. The equipment must be filled with medium before operation to prevent dry friction and seal failure;
Service hotline：0813-3202978
Working days: Monday to Saturday
Time：8：30-18:00
Tell：
0813-3202978
Email：
Consulting：
13890019297
No. 339-5, Kechuang 4th Road, High tech Industrial Park, Yantan District, Zigong City, Sichuan Province, China
Zigong Chuanmi Mechanical seal Co., LTD 蜀ICP备12011709号-1
