Welcome to the official website of Zigong Chuanmi Co., LTD!

EN

Homepage

/

Product Center

/

ZU33N ZU34N ZB33N ZB34N mechanical seal

搜索

Search

PRODUCT

All categories



ZU33N ZU34N ZB33N ZB34N mechanical seal

Pin 　　 brand: Chuan Mi seal Scope of application: chemical pumps, impurity pumps, water pumps Applicable industries: steelmaking, papermaking, chemical, electric power, cement industries, etc. Applicable stations: Process water pump Demineralized water pump High pressure water pump Applicable host: Chengdu Pump Factory, Chongqing Water Pump, Zibo Water Pump

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

CMDT-00029

Category

Product Center

Quantity

-

+

Stock:

0

set

Keyword:

Process water pump desalinated water pump high pressure



1

product description

Parameters

ZU33N ZU34N ZB33N ZB34N mechanical seal

Structural features:

1. Single end face, large taper spring drive, strong anti-blocking ability. When in use, turn left and right.

2. Auxiliary sealing ring can use rubber 0-ring, PTFE V-ring, PTFE wedge ring according to different conditions

3. It complies with ISO3069, DIN24960 and GB6556 standards and has strong versatility.

4. ZB type is ZU type balanced structure, suitable for higher pressure conditions.

Applicable medium:

Oil, water, acid, alkali, salt, etc.

Note: Because this type of water pump has many uses, the sealing material (friction pair) is also different, in order to ensure the reliability of the seal.

The manufacturer recommends as follows:

1. Clean water (working condition without particulate matter)-select the friction pair of moving ring (alloy), select the friction pair of static ring (graphite)

2. Strong corrosion (conditions containing particulate matter)-selection of moving ring friction pair (silicon carbide), static ring friction pair selection (silicon carbide)

3. Working conditions that contain particles and have large vibrations-use of moving ring friction pair (alloy), static ring friction pair (alloy)

4. It can also be customized according to customer requirements. If there is no requirement, the default is (clear water)

Working parameters:

Fixed content: ≤20%

Temperature: ≤280℃

Pressure: ≤4.0MPa (ZU≤1.0MPa/ZB≤4.0MPa)

Shaft diameter: ≤200mm

Material parameters:

Body material: 304, 316L or 2205, 2507, 1.4529

Seal ring material: M106D, YWN8, SSiC or SiC

Rubber material: fluorine rubber or perfluoroether rubber

main application:

The seal can be used for various water pumps and chemical pumps.

The models are as follows:

ZU34N-25 ZU34N-30 ZU34N-35 ZU34N-40 ZU34N-45

ZU34N-50 ZU34N-55 ZU34N-60 ZU34N-65 ZU34N-70

ZU34N-75 ZU34N-80 ZU34N-85 ZU34N-90 ZU34N-95

ZU34N-100 ZU34N-105 ZU34N-110 ZU34N-115 ZU34N-120

ZU33N-25 ZU33N-30 ZU33N-35 ZU33N-40 ZU33N-45

ZU33N-50 ZU33N-55 ZU33N-60 ZU33N-65 ZU33N-70

ZU33N-75 ZU33N-80 ZU33N-85 ZU33N-90 ZU33N-95

ZU33N-100 ZU33N-105 ZU33N-110 ZU33N-115 ZU33N-120

ZB34N-25 ZB34N-30 ZB34N-35 ZB34N-40 ZB34N-45

ZB34N-50 ZB34N-55 ZB34N-60 ZB34N-65 ZB34N-70

ZB34N-75 ZB34N-80 ZB34N-85 ZB34N-90 ZB34N-95

ZB34N-100 ZB34N-105 ZB34N-110 ZB34N-115 ZB34N-120

ZB33N-25 ZB33N-30 ZB33N-35 ZB33N-40 ZB33N-45

ZB33N-50 ZB33N-55 ZB33N-60 ZB33N-65 ZB33N-70

ZB33N-75 ZB33N-80 ZB33N-85 ZB33N-90 ZB33N-95

ZB33N-100 ZB33N-105 ZB33N-110 ZB33N-115 ZB33N-120

Installation and use requirements:

1. The radial runout of the shaft of the equipment should not be greater than 0.04 mm, and the axial runout should not be greater than 0.1 mm;

2. The sealing cavity of the equipment should be kept clean during installation, the sealing parts should be cleaned, and the sealing end face should be intact to prevent impurities and dust from being brought into the sealing part;

3. It is strictly forbidden to knock or knock during the installation process, so as not to damage the mechanical seal due to friction and seal failure;

4. During installation, the surface in contact with the seal should be coated with a layer of clean mechanical oil for smooth installation;

5. When installing the static ring gland, the tightening screws must be evenly stressed to ensure that the end face of the static ring is perpendicular to the axis line;

6. After installation, push the moving ring by hand, which can make the moving ring move flexibly on the shaft and have certain flexibility;

7. Rotate the shaft by hand after installation, and the shaft should not feel light or heavy;

8. The equipment must be filled with medium before operation to prevent dry friction and seal failure;

Operating parameters:

specification:

25mm~200mm

pressure:

0-4.0MPa

temperature:

-20~280

Line speed:

≤15m/min